At Ispire, we’ve created a revolutionary portable dab rig that’s meant to enhance and maximize your dabbing experience. The Ispire daab is a precision-engineered dab rig that takes into account the boiling temperatures of both terpenes and cannabinoids.
The daab Smart Dab Rig Kit comes with the world’s first portable, handheld smart dab rig that utilizes induction heating. This allows you the freedom to use the daab wherever you want and the ability to adjust the temperature to achieve the perfect dab hit every time.
In addition, daab is designed to be used in conjunction with our patent-pending carrier cup/inner cup combo, which provides a secure, easy, and effective dabbing experience.
The daab smart rig is ideal for both hot and cold-start dabs.
Product Specifications
- Induction Heating.
- Manual and Auto Mode.
- Recommended batteries: 18650 3000mAh-3500mAh 30A with a minimum 15A CDR rating.
- OLED screen.
- Fire Button
- Temperature: (250-800°F).
- + and – Buttons.
- Type-C Charging Port.
Ispire daab Induction Smart Rig: Quality and Design
The daab smart rig is designed with premium materials to ensure the safest dabbing experience. Furthermore, it is also designed to improve grip and ergonomics.
Moreover, the daab has its own induction patented technology, much safer than traditional dabbing devices. In short, you don’t need to worry about getting burned or causing a fire (no blow torches).
Our all-glass airpath utilizes induction heating’s unique characteristics to provide the perfect temperature control/flavor balance. With induction heating, you get the cleanest, most consistent dab hits possible. By combining our borosilicate inner cups with induction heating, the daab is able to precisely heat the borosilicate inner cup to the required temperature without exposing your product to impurities such as butane. Get ready for the smartest and cleanest dabbing experience with the Ispire daab!
Unique Patent-Pending Borosilicate Inner Cups
A ferrous metal enclosed between two sealed walls of borosilicate glass is used in the Ispire daab’s patent-pending borosilicate glass innner cup. As soon as you press the fire button on the daab, the metal within the borosilicate inner cup heats up, delivering heat to the banger and cup. This acts like a torch, but without the flame.
You can choose between two modes: manual mode or auto mode. For the manual mode, press and hold down the fire button until desired temperature is reached (from 250 to 800ºF).
On the other hand, if you prefer to use the auto mode, just press 2 times quickly to activate Auto mode and press one time to stop Auto mode.
How to Use the Ispire daab
The Ispire daab is very easy to use. It consists of a water chamber that you need to fill in with water up to the max limit. The water chamber is placed on top of the reclaim cup. Then, on top of the inner cup goes the carb cap to seal it. Furthermore, the daab is powered by two replaceable18650 batteries that must be installed in the hardware base’s lower section.
Use it with Both Hot and Cold Dabs
Cold start dabbing is essentially dabbing with low-temperature dabs. This may be accomplished quickly by putting cannabis concentrates onto a cold inner cup and then heating the daab to a temperature of max 450ºF. When the temperature of your inner cup is reduced, the terpenes and flavor of your cannabis concentrates are better preserved.
On the other hand, if you prefer hot dabs you can set the Ispire daab to a higher temperature and enjoy hot dabs with huge clouds of vapor.
Very Easy to Use
The daab is easy to use and very user friendly. You just have three buttons: fire button and + and – buttons to adjust the temperature. In addition, it’s very easy to assemble and it will take just one minute to get it ready. As mentioned above, you just need to add water to the water chamber:
After you have added the water, the assembly order is as follows: reclaim cup, inner cup, insulation silicone ring, then the water chamber, the inner cup into the banger connected to the water chamber and on top of it the carb cap.
After the assembly process, press the fire button five times quickly to turn the daab on, and adjust the temperature using the + and – buttons:
For hot dabs, add the cannabis concentrate to the inner cup when the red light stays on. On the other hand, if you prefer more flavor and to better taste the terpene profile of your cannabis concentrate, cold dabs are a better option. For cold dabs add the cannabis concentrate to the bottom of the inner cup. To activate auto mode, rapidly press the Fire button twice. While heating in auto mode, a red light flashes. When the red light begins to flash, cover the carrier cup with the carb cap.
Finally, we suggest cleaning the induction area after each use.
Ispire daab Kit Contents
- Ispire daab x 1
- Water Chamber/Carrier Cup x 1
- Reclaim Cup x 1
- Carb Cap x 1
- Inner Cup x 2
- USB Cable x 1
- User Manual x 1
- Insulation Silicone Ring x 2