Loading...
Loading...
Batteries
This EB05-02 is powered by a 400mAh Li-ion battery with Type-C charging, delivering adjustable output settings of 2.8V, 3.2V, and 3.6V with a 500mA charging current. It features a standard 510 (M7) threaded connection for wide cartridge compatibility and operates through button activation. An LED indicator clearly displays power levels—red for low, blue for medium, and green for high—while also providing status updates during charging and low-battery alerts. The device features a visual LED feedback while charging and when fully powered. Once a cartridge is installed, press the button to begin vapor production, making the device easy and intuitive to use. On-board charging management allows safe recharging. The user interface is simple and intuitive: press the button five times within two seconds to power on or off, and press the adjustment button once to change voltage settings. The device automatically exits power-adjustment mode after ten seconds.
Short-circuit Protection
Over usage Protection
Li-ion Battery Cell s
Cell Containment
Overcharge Protection
Battery Cell Capacity
400mAh
Output Voltage
2.8/3.2/3.6V
Charging Current
500mA
Cartridge Attachment
510 thread (M7)
Activation
Auto-draw or button activated
Charging Port
Type-C
Dimensions
74.19*39.69*18.00mm
Branding to Body
When a short circuit occurs, the device will not activate, and the LED will flash three times.
When an activation exceeds 10 ± 2 seconds, the device is deactivated and the LED flashes 10 times.
Cells meet the requirements of the UN Manual of Tests and Criteria for Li-ion batteries; section 38.3. Ispire power supplies are not required to be classified as Dangerous Goods when packaged properly for transport by sea, air, or ground due to their small capacity and containment within the device.
Cells are enclosed in metal housings to protect the battery cell from contact with external elements that may cause damage to the cell under normal usage conditions and transportation. Cells are not accessible to the user without permanent damage to the unit.
Charging control is on-board, not contained in a separate charging adapter. Simply connect the device to any active type C port with a standard Type C cable. The onboard controller shall permit the device to remain connected to power when fully charged without the risk of damage to the battery cell.
400mAh
2.8/3.2/3.6V
500mA
510 thread (M7)
Auto-draw or button activated
Type-C
74.19*39.69*18.00mm